Integrate CO Detectors Into Your Home Security System

Installing carbon monoxide detectors in your residence is a terrific start, but you are able to boost your family’s safety even more by including them into your security system. By doing so, you’ll enjoy another layer of protection, as your monitoring professionals will be notified whenever a CO detector goes off. This reinforcement can prove to be invaluable, especially if a disaster strikes in the middle of the night and you aren’t roused by the alarm.

Order CO Detectors In Albuquerque With Your Home Security System

Protect your family against all kinds of dangers with a full-featured home security system from Secure24 Alarm Systems. Our carbon monoxide and fire alarms in Albuquerque are monitored like your other security components. You’ll have assistance from an attentive, round-the-clock team in case an emergency occurs. Call (505) 317-6311 today to customize the security of your loved ones and home.

Property owners must safeguard against numerous risks like fire, flooding, and burglary. But what about something that can’t be discerned by human senses? Carbon monoxide presents an uncommon challenge because you might never know it’s there. Nevertheless, implementing CO detectors can effectively shield your family and property. Learn more about this hazardous gas and where to place carbon monoxide detectors in your Albuquerque residence.

What Is Carbon Monoxide?

Called the silent killer as of a result of its absence of odor, color, and taste, carbon monoxide is a commonly found gas produced by incomplete fuel combustion. Any appliance that consumes fuels like an oven or furnace can create carbon monoxide. Even though you usually won’t have a problem, issues can arise when an appliance is not regularly serviced or appropriately vented. These oversights can result in an accumulation of the potentially lethal gas in your residence. Generators and heaters of various types are commonly culpable for CO poisoning.

When subjected to minute levels of CO, you may experience dizziness, headaches, fatigue nausea, or vomiting. Continuous exposure to higher levels could result in cardiorespiratory arrest, coma, and death.

Suggestions On Where To Place Albuquerque Carbon Monoxide Detectors

If you don’t have at least one carbon monoxide detector in your residence, get one today. If possible, you ought to use one on each floor, and that includes basements. Review these recommendations on where to place carbon monoxide detectors in Albuquerque:

• Place them on every floor, especially where you utilize fuel-burning appliances, such as furnaces, fireplaces, gas dryers, and water heaters.
• Always have one within 10 feet of sleeping areas. If you only get one CO detector, this is where it should go.
• Place them about 10 to 20 feet away from sources of CO.
• Avoid installing them immediately above or next to fuel-consuming appliances, as a non-hazardous amount of carbon monoxide could be emitted when they start and prompt a false alarm.
• Fasten them to walls about five feet off the floor so they may measure air where people are breathing it.
• Avoid using them in dead-air zones and beside doors or windows.
• Place one in spaces above attached garages.

Check your CO detectors often and maintain them according to manufacturer instructions. You will usually need to replace them every five to six years. You should also make certain any fuel-consuming appliances are in in optimal working order and have adequate ventilation.