How To Reset Your Security System In Albuquerque

A nice benefit of having your home security installed professionally is that you rarely find a reason to concern yourself with it. Even so, there will likely be a couple situations when you need to reset your alarms in Albuquerque. If you use a smart command hub, resetting normally requires just a couple tap of a button after common events like false alarms and battery changes.

Consult Your Manual Before Trying to Reset Your Alarm Panel

Here’s a simple yet valuable tip before you try to reset your Albuquerque home security system, check your instruction manual ahead of time. You wouldn’t want to undermine your system because you hit a button in error. Additionally, the process might have changed if you upgraded from a number pad to a modernized touchscreen interface. And if you’re struggling to reset your system, don't worry as you can always call the professionals.

Resetting Your Albuquerque Security System Due To A False Alarm

Usually, a false alarm takes place as a result of a sensor that was tripped by accident. You can utilize the ADT Command touchscreen or bring up your ADT smartphone app and hit the shield icon and type in your credentials to switch off the system for these instances. You could receive notification from your monitoring professionals, but just let them know you had a false alarm.

Tips To Reset Your Alarm After A Power Outage In Albuquerque

When you lose power because of high winds or other factors, you may start to hear a beeping sound from your alarm’s central interface. This signifies that your home’s defense is running off the battery backup. To reset your equipment and halt the beeping, you need to deactivate and reactivate your system.

Keep in mind, if power is out for a longer period of time, you may need a full reset of your home’s security. Follow the instructions in the manual -- usually by entering your PIN number and hitting the off button twice -- and you should be back to normal. You may keep hearing the auxiliary power beeping, as it might not end until the battery charges entirely. Contact your home security agent if you continue to have issues with your ADT equipment at least 20 hours after your power is back on.

Reset Your Home Security System After Replacing A Battery

Occasionally you must switch out a battery within one of your security devices. To do this, you will switch your alarm system to test mode so you avoid triggering an accidental alarm. After the you replace the old battery, remove the alarm from "Test Mode" and revert back to normal operations. If the command center is unable to notice the piece of equipment or the battery light stays on, you could need a full reset of your security system.

Reset Your Albuquerque Security System When Adding Or Removing A User

Removing or adding people can be accomplished on the ADT Command panel and your ADT smartphone app. You shouldn't have to perform a resetting of your system when deleting or adding codes. But you should note, if you move into a new home that already has an ADT system, you'll want to reach out to your security specialists at (505) 317-6311 to set up a new service. The installer will go on site to upgrade components, install other devices (as required), and perform a full reset.

An Easy-To-Use Security System Is Only A Call Away

Figuring out how to reset a home security system in Albuquerque will likely be a challenge if it isn’t equipped with clear equipment and instructions. If the time has come to acquire your easy-to-use home protection system, contact (505) 317-6311 or send in the form below. We’ll be ready to design the perfect security system for your residence.